 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STW12NA50 N - CHANNEL ENHANCEMENT MODE FAST POWER MOS TRANSISTOR TYPE STW12NA50 s s s s s s s V DSS 500 V R DS( on) < 0.6 ID 11.6 A TYPICAL RDS(on) = 0.5 30V GATE TO SOURCE VOLTAGE RATING 100% AVALANCHE TESTED REPETITIVE AVALANCHE DATA AT 100oC LOW INTRINSIC CAPACITANCES GATE GHARGE MINIMIZED REDUCED THRESHOLD VOLTAGE SPREAD TO-247 3 2 1 DESCRIPTION This series of POWER MOSFETS represents the most advanced high voltage technology. The optimized cell layout coupled with a new proprietary edge termination concur to give the device low RDS(on) and gate charge, unequalled ruggedness and superior switching performance. APPLICATIONS s HIGH CURRENT, HIGH SPEED SWITCHING s SWITCH MODE POWER SUPPLIES (SMPS) s DC-AC CONVERTERS FOR WELDING EQUIPMENT AND UNINTERRUPTIBLE POWER SUPPLIES AND MOTOR DRIVE INTERNAL SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol VD S V DG R V GS ID ID ID M(*) P tot T stg Tj Parameter Drain-source Voltage (V GS = 0) Drain- gate Voltage (R GS = 20 k) Gate-source Voltage Drain Current (continuous) at T c = 25 C Drain Current (continuous) at T c = 100 oC Drain Current (pulsed) Total Dissipation at Tc = 25 C Derating Factor Storage Temperature Max. Operating Junction Temperature o o Value 500 500 30 11.6 7.3 46.4 170 1.36 -65 to 150 150 Unit V V V A A A W W/o C o o C C (*) Pulse width limited by safe operating area December 1995 1/9 STW12NA50 THERMAL DATA R thj-cas e Rthj- amb Rthj- amb Tl Thermal Resistance Junction-case Thermal Resistance Junction-ambient Thermal Resistance Case-sink Maximum Lead Temperature For Soldering Purpose Max Max Typ 0.73 30 0.1 300 o o C/W C/W o C/W o C AVALANCHE CHARACTERISTICS Symbol IA R E AS E AR IA R Parameter Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by T j max, < 1%) Single Pulse Avalanche Energy (starting T j = 25 o C, ID = I AR, VD D = 50 V) Repetitive Avalanche Energy (pulse width limited by T j max, < 1%) Avalanche Current, Repetitive or Not-Repetitive (T c = 100 o C, pulse width limited by T j max, < 1%) Max Value 11.6 670 26.5 7.3 Unit A mJ mJ A ELECTRICAL CHARACTERISTICS (Tcase = 25 oC unless otherwise specified) OFF Symbol V( BR)DSS I DS S IG SS Parameter Drain-source Breakdown Voltage Test Conditions I D = 250 A VG S = 0 Min. 500 25 250 100 Typ. Max. Unit V A A nA Zero Gate Voltage V DS = Max Rating Drain Current (V GS = 0) V DS = Max Rating x 0.8 Gate-body Leakage Current (V D S = 0) V GS = 30 V T c = 125 oC ON () Symbol V G S(th) R DS( on) I D( on) Parameter Gate Threshold Voltage V DS = V GS Static Drain-source On Resistance On State Drain Current V GS = 10V Test Conditions ID = 250 A ID = 6 A 12 Min. 2.25 Typ. 3 0.5 Max. 3.75 0.6 Unit V A V DS > ID( on) x RD S(on) max V GS = 10 V DYNAMIC Symbol gfs () C iss C oss C rss Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Test Conditions V DS > ID( on) x RD S(on) max V DS = 25 V f = 1 MHz ID = 6 A VG S = 0 Min. 6 Typ. 9 1750 250 80 2500 370 130 Max. Unit S pF pF pF 2/9 STW12NA50 ELECTRICAL CHARACTERISTICS (continued) SWITCHING ON Symbol t d(on) tr (di/dt) on Parameter Turn-on Time Rise Time Turn-on Current Slope Test Conditions V DD = 250 V I D = 6 A V GS = 10 V R G = 4.7 (see test circuit, figure 3) V DD = 400 V I D = 12 A VGS = 10 V R G = 47 (see test circuit, figure 5) V DD = 400 V I D = 12 A VG S = 10 V Min. Typ. 20 32 190 Max. 28 45 Unit ns ns A/s Qg Q gs Q gd Total Gate Charge Gate-Source Charge Gate-Drain Charge 80 12 37 110 nC nC nC SWITCHING OFF Symbol t r(Vof f) tf tc Parameter Off-voltage Rise Time Fall Time Cross-over Time Test Conditions V DD = 400 V I D = 12 A R G = 4.7 V GS = 10 V (see test circuit, figure 5) Min. Typ. 16 12 30 Max. 22 18 42 Unit ns ns ns SOURCE DRAIN DIODE Symbol IS D I SDM(*) V S D () t rr Q rr I RRM Parameter Source-drain Current Source-drain Current (pulsed) Forward On Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current I SD = 12 A VG S = 0 600 10.2 34 I SD = 12 A di/dt = 100 A/s V DD = 100 V T j = 150 o C (see test circuit, figure 5) Test Conditions Min. Typ. Max. 11.6 46.4 1.6 Unit A A V ns C A () Pulsed: Pulse duration = 300 s, duty cycle 1.5 % (*) Pulse width limited by safe operating area Safe Operating Areas Thermal Impedance 3/9 STW12NA50 Derating Curve Output Characteristics Transfer Characteristics Transconductance Static Drain-source On Resistance Gate Charge vs Gate-source Voltage 4/9 STW12NA50 Capacitance Variations Normalized Gate Threshold Voltage vs Temperature Normalized On Resistance vs Temperature Turn-on Current Slope Turn-off Drain-source Voltage Slope Cross-over Time 5/9 STW12NA50 Switching Safe Operating Area Accidental Overload Area Source-drain Diode Forward Characteristics Fig. 1: Unclamped Inductive Load Test Circuits Fig. 2: Unclamped Inductive Waveforms 6/9 STW12NA50 Fig. 3: Switching Times Test Circuits For Resistive Load Fig. 4: Gate Charge Test Circuit Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times 7/9 STW12NA50 TO-247 MECHANICAL DATA mm MIN. A A1 A2 b b1 b2 C D e E L L1 Q OP 3.05 0.4 20.4 5.43 15.3 15.57 3.7 5.3 3.5 4.3 5.84 3.71 1.5 1 4.7 TYP. MAX. 5.3 2.87 2.5 1.4 2.25 3.43 0.8 21.18 5.47 15.95 0.120 0.015 0.803 0.213 0.602 0.613 0.145 0.208 0.137 0.169 0.230 0.146 0.059 0.039 MIN. 0.185 inch TYP. MAX. 0.208 0.113 0.098 0.055 0.088 0.135 0.031 0.833 0.215 0.628 DIM. A A2 D L Q L1 b1 A1 E 8/9 b2 e o b C STW12NA50 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequ ences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical compone in life support devices or systems without express nts written approval of SGS-THOMSON Microelectonics. (c) 1996 SGS-THOMSON Microelectronics - Printed in Italy - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A . 9/9 |
Price & Availability of STW12NA50
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |